Eurofins TestAmerica - St. Louis

At a glance

Price

no per-test price printed on the lab’s website when we read it (15 Nov 2026): ask for a quote

Turnaround

not stated on the state list or the lab’s website: ask when you order

Homeowner samples

not stated: ask the lab

Lab facts

Listed by

New Mexico (New Mexico Environment Department (NMED) - Drinking Water Bureau, Drinking Water Laboratory Certification Program)

Address

St. Louis, MO · Open in Google Maps

Phone

(314) 298-8566

Website

location.eurofins.com/en/ele/testamerica-laboratories-inc

Not on the state list: found and checked by us, 15 Nov 2026

Public / homeowner samples

Public samples: ask the lab

Not stated per lab. NMED's Private Wells page says: "To test your water, contact a local water laboratory and confirm if they can analyze samples from private wells. While the Drinking Water Bureau (DWB) certifies laboratories for public water systems, many of these labs also offer services to private well owners." It names no lab, and NMED's list does not say which labs take samples from private well owners. NMED's free well testing (water fairs and NMED field offices) is done by NMED itself, not by the labs on this list.

Location note

Lab is in MO, certified by New Mexico (often used as a mail-in lab).

Certification record

Certificate ID

MO00054

Issued by

New Mexico Environment Department (NMED) - Drinking Water Bureau, Drinking Water Laboratory Certification Program (certification program)

Expiry on the list

6/30/2027 · expires in 227 days

List version

Laboratories Certified by NMED-DWB to Analyze Drinking Water Samples for Water Systems in New Mexico, version Last Updated: 10/26/2026

We fetched it

3 Nov 2026 (file SHA-256 01b15ad0cadf…) · open the state file

Tests on the state list

This list does not break certification down by analyte. Ask the lab which tests it is certified for; the groups as written on the list are below.

• Named on the official list The state list names this analyte (or a column for it) for this lab.
• Group-level certification Certified for a parent group (e.g. 'Inorganics') that includes this analyte. Confirm the specific test with the lab.
• Partial group certification The list marks the group as 'Partial'. Confirm this analyte with the lab.
• Subcontracted The lab sends this analyte to another accredited lab (MDH 'X*').

NMED prints the analyte groups as "RAD" (codes keyed by the legend on NMED's list). NMED certifies whole analyte groups, not single analytes. NMED's legend defines RAD only as "radiologicals" and names no analyte, so neither radon nor uranium is shown from it. NMED's "On Contract" column: N. NMED's footnote: "Laboratories listed as "N" are not on contract with NMED-DWB and may not submit invoices for payment of sample analyses. Systems utilizing labs which are not under contract with NMED-DWB are responsible for payment of services." This concerns public water systems' compliance samples, not private well owners. Out-of-state lab (MO) certified by NMED-DWB. NMED's list prints city and state only, no street address.

Around this lab: St. Louis City, MO

• Private wells: about 0 people, 0% of St. Louis City’s 315,685 residents (USGS, 2015); rank 102 of 115 counties in Missouri by people on wells.

• EPA radon zone (indoor air): Zone 2: moderate potential (average indoor radon may be between 2 and 4 pCi/L). EPA says the zone map should not decide whether one home needs testing.
• Older homes (Census ACS 2020–2024): 86% of 174,111 housing units were built before 1980, above the state share of 53%. Homes built before 1986 are more likely to have lead solder or fittings, so test tap water for lead there.
• PFAS in public water nearby (public supply, not your well): 3 public systems serving this county reported EPA UCMR 5 results; 0 had a PFOA or PFOS sample at or above 4.0 ng/L.

County figures describe where the lab is, not the lab. Sources: USGS 2015 water use and 2017 arsenic estimates, EPA radon zones, Census ACS table B25034 (2020–2024), EPA UCMR 5 (2023–2026); details and links on the sources page.

Before you send a sample

Call the lab to confirm it's currently certified for the exact test and method, that it accepts samples from homeowners, and how to collect and ship them. Bacteria samples have short holding times. Status can change between list updates. To check a status, contact the New Mexico certification program.

Is this your lab?

Labs can ask for corrections through the agency that publishes their state list. Homeowner service, prices and turnaround above come only from the lab’s own website. To ask us to correct or remove this listing, write to us (how we handle listings).